You are required to design and apply an IP addressing scheme for the topology shown for the Aman Resort network in Figure 1. You will be given one class A block of IP addresses that you must subnet and provide the IP addressing plan for the network. Using Packet Tracer, you must first create the topology diagram of the network as shown in Figure 1. Once the topology diagram is done, configure each device according to your proposed IP addressing scheme. When the configuration is complete, use the appropriate commands to verify that the network is working properly.

You are given the 172.16.10.0 address space to use in your network design. Prepare the IPv4 addressing plan for this network following VLSM subnetting techniques.

The post You are required to design and apply an IP addressing scheme for the topology shown for the Aman Resort network: Networks and Networking Assignment, APU, Malaysia appeared first on Malaysia Assignment Help.