MITS5003 Wireless Networks and Communication Assignment

Assessment 3: Major Assignment 

Overview 

Weight	Length	Due date	ULO
30%	1500 – 2500 Words	Session 12 Sunday 11:55 PM	ULO1-ULO4

Introduction 

Students must develop and design a wireless corporate network for a university in this assessment. You must undertake a requirement analysis and understand the site, including the infrastructure and any line-of-sight difficulties, to design the corporate network. Because some facilities hold sensitive data, additional attention must be taken when implementing wireless connections. Furthermore, because the university has a hospital, wireless devices and channels may cause medical equipment to malfunction. You must pay close attention to limiting radio frequencies in and around the emergency room area to minimise any interference.

Task 

You are working as a wireless consultant for Mahnoor Solutions. One of the client of Mahnoor solutions want help with building and implementing a secure wireless networking solution for their building. The building layout of their client is given in Fig. 1. You must suggest about the number of access points they should be using, the proper location to install those antenna in the building. For instance, what should be the appropriate location for the antenna (balcony or entrances) so that the indoor users should also get the acceptable signal quality. Moreover, the client organization has 100 employees working on 9 different floors and for different reasons they can go to different floors and would like to have connectivity for their endpoints on all those floors. The report also wants you to suggest the Wi-Fi channel for them because some of the Wi-Fi channel are crowded and the signals get degraded due to the interference from other users in the proximity. 

The assessment requires you to plan and design a wireless network for the client making a short report for the justification of your choice for different locations of the antenna and to use specific Wi-Fi channel within the building.  

Citation of sources is mandatory and must be in the IEEE style. 

Figure 1: Client Building

Submission Instructions 

All submissions are to be submitted through Turnitin. Drop-boxes linked to Turnitin will be set up in Moodle. Assessments not submitted through these drop- boxes will not be considered. Submissions must be made by the end of session 12 Sunday 11:55PM.

The Turnitin similarity score will be used in determine any plagiarism of your submitted assessment. Turnitin will check conference websites, Journal articles, online resources, and your peer’s submissions for plagiarism. You can see your Turnitin similarity score when you submit your assessments to the appropriate drop-box. If your similarity score is of concern, you will have a chance to change your assessment and resubmit. However, re-submission is only allowed prior to the submission due date and time. After the due date and time have elapsed you cannot make re-submissions.  

Please Note: All work is due by the due date and time. Late submissions will be penalized at the rate of 10% of the assessment final grade per day including weekends. 

 

Marking Guide: 100 Marks 

Task	Description	Marks
Report Layout	The report style, language and structure should be appropriate.	5
Introduction	This section should include a few sentences which provide an outline of the assessment.	5
Requirement Analysis	Analyse and discuss requirements of the university, including the functional and non-functional requirements of the wireless enterprise network.	15
Network Design	A comprehensive network design needs to be provided, covering all the buildings and open areas of the university. The network design needs to include all the networking devices, equipment and connections. The network is required to be designed in any industry tool.	20
Critical Analysis	The students are required to provide a critical analysis of the design of the network, the analysis should be in depth and detailed. The critical analysis should provide reasoning for the selection of the network devices and the design.	10
Constraint and Limitations	The constraints and limitations of the enterprise network need to be discussed. A workaround needs to be discussed and the effect of the constraints and limitations need to be explored.	10
Conclusion	Conclude with your opinion about the results.	5
References	Follow the IEEE style	5

Marking criteria/Rubric 

You will be assessed on the following marking criteria/Rubric:  

Assessment criteria	Exceptional >=80%	Admirable 70% – 79%	Creditable 60% – 69%	Acceptable 50% – 59%	Unsatisfactory <=49%
C1. Report Layout 5 points	Extremely well structured and organized report; use of professional language; report template has been followed	Well-structured and organized report; use of professional language; report template has been followed	Structured and organised report; use of language is appropriate; template has been followed	Structured and organised report; use of language could be improved; template  has been followed partially	Choppy and confusing; format was  difficult to follow; language needs to be proofread plenty of errors; template has not been used
C2. Introduction 5 points	The introduction is well rounded and provides a brief description of the assessment; the introduction sets an excellent flow for the report	The introduction provides a brief description of the assessment; the introduction sets a good flow for the report	The introduction provides a brief description of the assessment; the introduction sets the flow for the report	The introduction could relate more to the assessment	The introduction does not relate to the assessment and does not set the flow for the assessment
C3. Requirement Analysis 15 points	The requirement analysis is in depth and detailed; all requirements of the university have been considered; the functional and nonfunctional requirements explained extremely well.	The requirement analysis is in depth and detailed; most requirements of the university have been considered; the functional and nonfunctional requirements explained well.	The requirement analysis is provided; most requirements of the university have been considered; the functional and nonfunctional requirements are explained.	A requirement analysis has been carried out; some functional and nonfunctional requirements discussed	A requirement analysis has not been carried out; briefly discussed the requirements

C3. Network Design 20 points	The network design covers all areas of the  university; the network design is clear and easy to understand; the network is extremely well designed with an industry tool	The network design covers all areas of the university; the network design is clear; the network is well designed with an industry tool	The network design covers most areas of the university; the network is well designed with an industry tool	The network is designed with an industry tool and covers most areas of the network	The network is not designed with an industry tool; The network design seems incomplete and does not cover all areas
C4. Critical Analysis 10 points	Provided an excellent critical analysis with focus of the design of the network; the critical analysis provided great reasoning for the selection of the networking devices and the design	Provided a good critical analysis with focus of the design of the network; the critical analysis provided reasonable reasoning for the selection of the networking devices and the design	Provided a reasonable critical analysis with focus of the design of the network; the critical analysis provided reasonable reasoning for the selection of the networking devices and the design	The critical analysis focused on the design of the network; somewhat reasoning provided	The critical analysis lacks depth and detail; the critical analysis did  not cover the limitations of the proposed wireless devices
C4. Constraints and Limitations 10 points	The constraints and limitations explained extremely well; a workaround the constraints and limitations are provided; the effect of the constraints and limitations discussed	The constraints and limitations explained very well; a workaround the constraints and limitations are provided; the effect of the constraints and limitations discussed	An explanation of the constraints and limitations is provided; a workaround the constraints and limitations are provided; the effect of the constraints and limitations discussed	An explanation of the constraints and limitations is provided; a brief workaround discussed	The constraints and limitations are hardly explained, a workaround not discussed; the effects have not been highlighted
C5. Conclusion 5 points	Provided an excellent summary of the assessment; covering all aspects of the assessment	Provided a good summary of the assessment; covering most aspects of the assessment	Provided a summary of the assessment; somewhat covered the aspects of the assessment	Provided a summary of the assessment.	The conclusions failed to summarise the assessment
C6. References 5 points	The references followed IEEE Style; the references were cited and complete	The references followed IEEE Style; most the references were cited and complete	Most references followed IEEE Style; some of the references were cited and complete	Most references followed IEEE Style; the references were not cited	The references did not follow IEEE Style and were not cited and incomplete

 

The post MITS5003 Wireless Networks and Communication Assignment Help first appeared on Marvel Assignment Help.