Victor kean

Well this whole topic is a bit too much PHY-oriented for our course, but I think the following could be interesting for CN1/CN2 context: Normally, when you send packets between NBIoT sensor and the network (uplink or downlink, no difference), you have some overheads associated with actually wrapping the information into all of the appropriate […]

1. Select an organisation of your choice where you have either worked, you know about it, or an organisation with sufficient details available online 2. Find organizational requirement for a computer network (s) and highlight the type of services the organization requires. 3. Draw a logical and a physical network diagram of a typical organisation

Title: Third party Logistics service providers Operations Sustainability in the United Kingdom in relation to changes in trends and standards of Transport and Logistics in 2019 Trends, Standard and regulation changes can have a great impact on Third Party Logistics (TPL) service providers transport and operations. It is important to understand how TPL providers have

Question 1 Briefly describe the IPv4 address structure.  Question 2 How is a switching table constructed?  Question 3 Describe how a routing table is structured and used.   Reflection Exercise Reflection is the process of self-evaluation of your learning experience. It guides you in critically evaluating your progress in mastering a concept or technique. a) Write

You are required to develop a report about project risk management as specified below. Itshould be constructed using the material contained in the paper with the above titlepublished by Dag Vidar Hanstad in 2012 and any other information that you think isrelevant. The case study above provides a discussion on how Norway’s national teamprepared for

Develop an estimated duration for each activity.2. Using a project start time of 0 (or January 1) and a required project com-pletion time of 180 days (or June 30), calculate the ES, EF, LS, and LF times and TS for each activity. If your calculations result in a project schedule with negative TS, revise the

This research study requires in-depth reading and analysis of a single specific topic. This one topic can be of your choice, but the topic must have been covered in this course.You require to take one research paper of that topic and make a small report on that research paper which should contain the following:• Introduction

Throughout this course you have learned about the importance of flow; material andinformation flow. The concept was discovered in topics such as process management,bottleneck analysis, inventory management, Toyota Production System to name a few.The focus has been strongly on the internal process environment.Assessment 4 is an individual research report that is focused on ensuring that

Designing A High Speed Wireless Data Link Line of Sight Link Budget Analysis Several major factors that can impact the performance of a radio system are Available/permitted output power, Bandwidth, Receiver sensitivity, Antenna gains Environmental conditions In this case study, the students will be required to calculate the link budget for a LOS Wireless link. Read through the following

Task: Assignment Question Purpose Identify the appropriate configurations for switches, including the VLANs and VTPs implementations based on specific situation. Requirement / Assignment Question You have been appointed as the new Network Engineer at SmartIdea. Your first task is to segment your company’s LAN into several VLANs. The new logical network with VLANs is as