Uncategorized

Design a regenerator for a gas turbine engine. The engine is to deliver 50,000 hp with a compression ratio of 4:1 and a turbine inlet temperature of2,0000E The regenerator should have an effectiveness of 0.85 and pressure drops not to exceed 0.5 psi. The pressure drop of the combustor is 1.0 psi.

Very low-pressure-ratio gas turbines can obtain very high theoretical efficiencies if they are operated in a regenerative cycle with very effective (0.95) heat exchangers. A 50,000-hp engine operates at a pressure ratio of 3:1 and has a turbine inlet temperature of 1,5000E Design a 95 percent effective regenerator for this application where the hot-side surface

Copyright – The Australian College for Microcomputers Pty Ltd Sydney 2020 1 Week 1 – Tutorial Key Phrases / Tax Payable Question 1a) Doug (resident of Australia) earns $190,000 from his employment as an IT specialist. He hasno allowable deductions.b) Doug (resident of Australia) earns $32,500 from his employment as an IT specialist. He hasno

Calculate the overall heat transfer coefficient and the duty (rating) of heat flow from the hot gases to the cold air in the cross-flow tube bank of the heat exchanger sketched in Pig. P3-16. The following operating conditions are given: air flow rate = 3,000 lbm/hr hot-gas flow rate = 5,000 lbm/hr hot-gas inlet temperature

© The Australian College for Microcomputers Pty Ltd Sydney 2020Week 2 – Income QuestionsQuestion 1a) What are the two main types of income illustrated by the 2 circles diagram?b) What is an example of ordinary income?c) What is an example of statutory income?d) What is an example of exempt income?e) What is an example of

The air-handling units (AHUs) for Auric Enterprises, Inc., building, Problem 1-31, are required to handle 350,000 Btu/hr with a liquid-side head loss of 22 QZ,where Q is in cfs and the head loss is in ft-lbf/lbm, The cooling fluid, Monsanto TherminoI®, enters at 45°P and exits at 600 E Air enters the AHU at nop

!Using and Managing Data and InformationApril cohort (2019 ! 2020)BA3020QA – Assignment 3Task 1A supermarket manager wanted to investigate the profile of shoppers resistantto the use of self-checkout counters available at the store he manages and tofind out the reasons behind their resistance. He asks three of his staff toconduct a survey among customers using

Gas turbines often use regenerative cycles to improve overall operating efficiency. The schematic shown in Figure P3-18 is an example of a gas turbine engine with a regenerator. Extensive cycle analyzes have established that for optimum cycle operating efficiency, the following specifications are required fot the regenerator. Using heat transfer surfaces available in the book,

In an industrial plant a shell-and-tube heat exchanger is heating water initially at 120°F by means of steam condensing at 280°F on the outside of the tubes. The heat exchanger has 50 steel tubes (ID = 0.052 ft and OD = 0.070 ft) in a tube bundle which is 10 ft long. The water flows

Investment valuationtechniqueWEEK # 9Week 5 7 8 9 10 11 = Final assignment2000 words50 % WeightingLearning objectives To understand the meaning of investment valuation To identify margin account and margin return To discuss investment decision from the margin returnSource:https://www.isurv.com/info/390/features/8805/traditional_method_of_investment_valuation_for_beginners2What is investment valuation?This method involves reflecting risk, return andexpectations of growth through the use of a