1
| Assignment Front Sheet | |||||
| Code | Module title | Level | Lecturer | Student Number | Student Name |
| 4MA009 | Computer Aided Design | 4 | Adriano Cerminara Jonathan Rackley Muhammad Sayed |
| Assessment Title: CAD Coursework |
| Date Issued: 14/11/2020 | Assignment Deadline: 18th December 2020 |
| Date of Received Submission: |
2
| Task | L.O. Code |
Learning Outcome Criteria |
| Q1, Q2, Q4 |
1 | Understand the elements and structure of typical design report |
| Q1, Q3, Q4 |
2 | Create dimensioned line drawings of basic components and assemblies in two and three dimensions |
| Q5 | 3 | Apply animation and analysis to the simulated component or assembly as provided by the software |
| Q4 | 4 | Apply the CAD techniques to realise a given design specification |
| I verify that this is all my own work and that I have had sufficient guidance to complete this examination. |
Student signature: |
| Additional information; |
| Please ensure you print & attach in front of this page the eVision ‘bar code’ sheet to receive a submission receipt |
3
| Assignment Front Sheet | |||||
| Code | Module title | Level | Lecturer | Student Number | Student Name |
| 4MA009 | Computer Aided Design | 4 | Adriano Cerminara Jonathan Rackley Muhammad Sayed |
| Assessment Title: CAD Coursework |
| Type of assessment -please tick | Assignment |
| Assessors feedback (RED INK ONLY) |
—————————————————————————————————————————– ————————————
4
| Assignment Front Sheet | |||||
| Code | Module title | Level | Lecturer | Student Number | Student Name |
| 4MA009 | Computed Aided Design | 4 | Adriano Cerminara Jonathan Rackley Muhammad Sayed |
| Assessment Title: CAD Coursework |
| Internal Verifier: |
Grading Verification
| Verifiers feedback (GREEN INK ONLY) | Internal Verifier stamp / date/ signature |
| Grading decisions appropriate | Y | N |
| Assessors decision confirmed | Y | N |
| Appropriate feedback given | Y | N |
5
6
Module Descriptor; See VLE
Marks
The assignment will be marked on the work given in but if the mark achieved is below a pass the work will not
be returned for additions or amendments and the grade achieved will be submitted to the exam board (in-line
with University of Wolverhampton regulations). If the work is not handed in by the due date it will be
considered a zero grade (fail & repeat).
Assignment extensions cannot be granted without accompanying mitigating circumstances.
All course work MUST have the report word count provided at the end of the report.
Guidance
The report must have a title page, a contents page and a bibliography, each section should be separate with
heading or sub heading highlighted in some manner.
Drawings can be photocopied or downloaded but they must be referenced and have permission from the
owner.
Text must not be downloaded and claimed as students own; however referenced or cited work is acceptable.
Loose sheets of paper will not be accepted under any circumstances – the report should be stapled together
with the front covers appended to the front of the work to be marked.
The report must be entirely word processed.
The report will only be accepted once signed by the student to verify it is their work
Late submission of coursework
Where work is submitted late, the grade will be reduced according to University regulations.
7
Plagiarism
Plagiarism is completely unacceptable and is dealt with very severely. To avoid plagiarism you must be sure
you understand what plagiarism is, and how to avoid it.
The importance of correctly acknowledging the work of others cannot be over-emphasised. It is absolutely
essential that specific, detailed references are provided locally within your work for each and every extract
you take from work that is not your own.
A general reference at the end of a report to a source from which you have extracted text items is not
acceptable.
The use of italics and/or inverted commas to highlight text extracts which are not your own original work is a
simple way of demonstrating honesty in your work. Each text extract you use should be individually linked to a
numbered list of specific references provided at the end of your work.
For further information, see the information on the Universities regulations.
8
Computer Aided Design (4MA009)
Assignment Brief
Total Final Weighting: 50%
Instructions to the students
Make a CAD design and assembly of the wind turbine model depicted in figure 1. The assembly contains 6
parts: base, lower mast, upper mast, rotor, housing, and blades. Please refer to the drawings of all these
individual parts with the relevant dimensions included in the accompanying files base.pdf, lower-mast.pdf,
upper-mast.pdf, rotor.pdf, housing.pdf, and blade.pdf (in the same canvas folder of the present assignment
brief). In addition, please refer also to the supporting file blade-description.pdf, which provides you with a more
detailed description about how to obtain the blade shape.
Your final work should include:
– the CAD files of each individual part;
– the CAD assembly file;
– a report describing the main steps (with illustrations, e.g. screenshots) of the full design.
The grading breakdown for your work is as follows:
1- Correct shapes – 30%
2- Correct dimensions – 25%
3- Correct mates – 30%
4- Report – 15%
Figure 1: wind turbine CAD model
End of the Assignment Brief
