The cylinder shown in Figure made from a uniform material. What is its specific weight? If the cylinder is placed in fresh water at 95C, how much of its height would be above the surface?

A cylindrical block of wood is 1.00 m in diameter and 1.00 m long and has a specific weight of 8.00 kN/m3. Will it float in a stable manner in water with its axis vertical? A container for an emergency beacon is a rectangular shape 30.0 in wide, 40.0 in long, and 22.0 in high.

A closed, hollow, empty drum has a diameter of 24.0 in, a length of 48.0 in, and a weight of 70.0 lb. Will it float stably if placed upright in water? Figure 5.30 shows a river scow used to carry bulk materials. Assume that the scow’s center of gravity is at its centroid and that

A block of wood with a specific weight of 32 lb/ft3 is 6 by 6 by 12 in. If it is placed in oil (sg=0.90) with the 6 by 12-in surface parallel to the surface of the oil, would it be stable? A barge is 60 ft long, 20 ft wide, and 8 ft deep.

A golf club head is made from aluminum having a specific weight of 0.100 lb/in3. In air it weighs 0.500 lb. What would be its apparent weight when suspended in cool water? Wetsuits are prohibited in some triathlons due to the added buoyancy they provide the swimmer, essentially holding a greater portion of the body

These assignment focuses on the Regulations in telecomunication industry as well as the role of telecommunications services. Regulations in telecomunication industry:The role of telecommunications services Answer both questions separately each answer should be 750 – 1000 words in length. Make sure each of your answers relies on the arguments in at least two of the

A certain deep-well pump for a residence is rated to deliver 745 gal/h of water. Express this flow rate in ft3/s. A small pump delivers 0.85 gal/h of liquid fertilizer. Express this flow rate in ft3/s. A small metering pump delivers 11.4 gal of a water treatment chemical per 24 h. Express this flow rate

Water at 10C is flowing at 0 .075 m3/s. Calculate the weight flow rate and the mass flow rate. Oil for a hydraulic system (sg=0.90) is flowing at 2.35*10^-3 m3/s. Calculate the weight flow rate and mass flow rate.

A large blower for a furnace delivers 47 000 ft3/min (CFM) of air having a specific weight of 0.075 lb/ft3. Calculate the weight flow rate and mass flow rate. A furnace requires 1200 lb/h of air for efficient combustion. If the air has a specific weight of 0.062 lb/ft3, compute the required volume flow rate.

At approximately what volume flow rate will propyl alcohol at 77⁰F become turbulent when flowing in a 3-in Type K copper tube? SAE 30 oil (sg=0.89) is flowing at 45 L/min through a 20 mm OD × 1.2 mm wall hydraulic steel tube. If the oil is at 110C, is the flow laminar or turbulent?